|
Description:
The DMXEtherGate MK2 is the evolution
of the DMXetherGate. This new DMXEthergate has 2 output or input ports, supports
multiple protocols and is configured using any web browser thank to the built-in
webpage.
- Plug and Play or Configured
operation
- 2 input, 2 output or 1 in 1
out ports
- RDM enabled (TALK Back)
All you need is an "IN" box
at the Console, 1 (or more) "OUT" at the Fixture end and an Ethernet network in
between.
Modes
- Plug & Play: Just
unpack, power the DMXEtherGate, set the universe number (1 to 6) using the dip
switches, Plug in the Ethernet and DMX and that's it !
- Configured: Using any
webbrowser, log into the DMXEthergate by typing it's IP address in the address
bar. This mode will let you use all the power of the DMXEtherGate engine, you
will have access to all the features such as: 256 universes, Remote
configuration, Node-Universe Binding ...
Operation (Plug &Play
mode)
The DMXEtherGate IN receives
DMX512 from the lighting controller, the high speed engine processes the DMX for
transmission over ethernet. The packet is then sent using a UDP/IP scheme with a
broadcast IP and MAC address. Every node on the same network will receive that
packet. The output node will then un pack the DMX data and update it's internal
buffers.
Hardware
Like most of our
products, the DMXEtherGate hardware fits into a robust metal 9.5 inch 1 Unit
rack, 2 Can be mounted side by side to form a standard 19 inch rack, The
DMXEtherGate has 4 connectors: DMX512 IN or OUT depending on the model, Ethercon
RJ45 and IEC power connector. The DMXEtherGate has an internal mains power
supply that will accept any input voltage from 96 to 264V AC
Both nodes are
CE and FCC approved.
Specifications
- Plug and Play or Configured
operation
- 2 input, 2 output or 1 in 1 out
ports
- RDM enabled (TALK Back)
- Up to 256 DMX512 universes on a
10Base-T Ethernet link
- Remote configuration using any web
browser.
- Endless Softpatch capabilities
- Node Universe Binding (have
multiple nodes each assigned to their own DMX universe)
- Static or DHCP IP configuration
- RLE Data compression to minimize
bandwidth
- Easy firmware upgrades using DHCP
+ TFTP
- ENTTEC protocol (ESP)
- Artnet protocol support
Datasheets
Downloads
Images
DMXEtherGate MK2 Front
hi-res image
DMXEtherGate MK2 Back
hi-res image
DMXEtherGate MK2 Angle
hi-res image
Firmware
Please find below a list of all available firmware versions with their
associated release notes.
| Version |
Release notes |
Comments |
Download |
| 1.6 build 118 |
-Artnet mode Bug fixes
-Data transmit Broadcast Class B & C fixes
|
We strongly recommend you use this new version if you
are using the etheragte in Artnet mode. |
Download
|
|
