|
General Description:
The DMX EtherGate Mk2 is the evolution of the DMX EtherGate
The DMX EtherGate Mk2 offers all the features you would expect such as:
- Plug and Play or Configured operation
- 2 DMX outputs or inputs
- RDM enabled (TALK Back)
- Up to 256 DMX512 universes on a 10Base-T link
- Remote configuration using any web browser (built-in web page)
- Endless Softpatch capabilities
- Node Universe Binding (have multiple nodes each assigned to their own DMX universe)
- RLE Data compression to minimize bandwidth
- Mulitple protocol support: ESP & Artnet
- Includes Lightfactory Limited Edition
The Ethernet Gateway.
Description: The DMXEtherGate MK2 is the evolution of the DMX etherGate.
This new DMX Ethergate has 2 output or input ports, supports multiple protocols and is configured using any web browser thank to the built-in webpage.
- Plug and Play or Configured operation
- 2 input or output ports
- RDM enabled (TALK Back)
- Up to 256 DMX512 universes on a 10Base-T Ethernet link
- Remote configuration using any web browser.
- Endless Softpatch capabilities
- Node Universe Binding (have multiple nodes each assigned to their own DMX universe)
- Static or DHCP IP configuration
- RLE Data compression to minimize bandwidth
- Easy firmware upgrades using DHCP + TFTP
- ENTTEC protocol (ESP)
- Artnet protocol support
All you need is an "IN" box at the Console, 1 (or more) "OUT" at the Fixture end and an Ethernet network in between.
The DMX EtherGate can work in 2 modes Plug & Play and Configured:
- Plug & Play: Just unpack, power the DMXEtherGate, set the universe number (1 to 6) using the dip switches, Plug in the Ethernet and DMX and that's it !
- Configured: Using any webbrowser, log into the DMXEthergate by typing it's IP address in the address bar. This mode will let you use all the power of the DMXEtherGate engine, you will have access to all the features such as: 256 universes, Remote configuration, Node-Universe Binding ...
Operation (Plug &Play mode) : The DMX EtherGate IN receives DMX512 from the lighting controller, the high speed engine processes the DMX for transmission over ethernet. The packet is then sent using a UDP/IP scheme with a broadcast IP and MAC address. Every node on the same network will receive that packet. The output node will then un pack the DMX data and update it's internal buffers.
Hardware: Like most of our products, the DMX EtherGate hardware fits into a robust metal 9.5 inch 1 Unit rack, 2 Can be mounted side by side to form a standard 19 inch rack, The DMX EtherGate has 4 connectors: DMX512 IN or OUT depending on the model, Ethercon RJ45 and IEC power connector. The DMXEtherGate has an internal mains power supply that will accept any input voltage from 96 to 264V AC
Both nodes are CE and FCC approved.
We also have 3rd Party software available:
LightFactory
ShowEditor Mk2 for Windows
Streamer Utilities
ESP WYSIWYG Dll
D2XX Driver install (for Open DMXUSB )
VCOM Driver install (DMX USB Pro)
This includes:
- DMXEtherGate Unit
- Lightfactory Limited Edition
- Patch lead
- User manual
|
|
ENTTEC |
ENTTEC |
Velleman |
ENTTEC |
ENTTEC |
|
|
|
|
|
|
| Interface |
|
|
|
|
|
| Software |
|
|
|
|
|
| USB Cable A-B |
|
|
|
|
|
| Ethernet Cable |
|
|
|
|
|
| Patch Lead |
|
|
|
|
|
| User Manual |
|
|
|
|
|
| Universes -512 DMX Channels |
1 |
1 |
1 |
8 |
2 |
| USB to DMX Interface |
|
|
|
|
|
| DMX => Ethernet / Ethernet => DMX |
|
|
|
|
|
| Computer Support (PIII and above) |
|
|
|
|
|
| Windows and Linux Compatible |
|
|
|
|
|
| Free, Open or Paid Software Compatible |
|
|
|
|
|
| Isolation CPU Surges 3000v Protection |
|
|
|
|
|
| Micro Processor Enabled (More Stable) |
|
|
|
|
|
| RDM (talkback) Compatible |
|
|
|
|
|
| Upgradeable Firmware |
|
|
|
|
|
| DMX Hub/Splitter |
|
|
|
|
|
| DMX Merger |
|
|
|
|
|
| Wireless DMX |
|
|
|
|
|
| Remote Configuration |
|
|
|
|
|
| Node Universe Binding |
|
|
|
|
|
| ARTNET and ESP Compatible |
|
|
|
|
|
| Plug and Play |
|
|
|
|
|
| Technical Support |
|
|
|
|
|
|
