|
Product Description:
Dual 250-Watt amplifier
Two 250-watt power amplifier can fill surprisingly large clubs or rooms, or project your sound over a considerable distance outdoors. The class-D power amplifier has been painstakingly designed to deliver superior sound quality as well as reliability in a remarkably compact unit.
Versatile 10-channel Mixer with Monitor and Record Outputs
If there are more members in your band than the STAGEPAS™ 300's 8 input channels can handle, or you simply have a lot of sources to mix, the STAGEPAS™ 500 gives you 10 input channels in all: four mono microphone/line inputs and three stereo line inputs. The additional stereo channel can used for either a stereo or mono source. In addition to the main speaker outputs the mixer has line outputs that can be used to connect additional powered speakers for monitoring, and to send the mixer's output to a recording device.
Phantom Power for High-performance Condenser Microphones
The STAGEPAS™ 500 mixer features switchable phantom power for the four mono microphone/line inputs. This lets you use high-performance phantom-powered condenser microphones in situations where you want the extended, natural response they provide.
Built-in Channel Compression/Limiting, 2-band Channel EQ and SPX Digital Reverb
Channels 1 and 2 feature LIMIT/COMP switches that let you apply either limiting or compression to those channels. Limiting can be useful to prevent input overload and distortion with sources that have a wide dynamic range, while compression can add punch to vocals, bass, guitar, and other sources while smoothing out the sound and helping it to "ride" better in the mix. Like the STAGEPAS™ 300 mixer, the STAGEPAS™ 500 mixer has 2-band EQ controls on each channel, as well as REVERB switches on channels 1 through 4. A separate REVERB level control adjusts the reverb mix.
High-performance 10" 2-way Passive Speakers
STAGEPAS™ 500 speakers have 10Ewoofers and 1Ehigh-frequency units. Both types deliver clean, high-quality sound. The speakers can be stand mounted without standard speaker stand adapters(Tripod pole diameter is 35 mm).
Other Features
- MUSIC / SPEECH Switch optimizes the system settings for maximum clarity with speech.
- XLR and phone-jack inputs on mono channels, and phone-jack and RCA pin-jack inputs on stereo channels allow connection to a wide range of sources.
- MIC/LINE switches select microphone or line level input matching for channels 1 through 4.
- Auto Limiter prevents overload damage to power amplifier and speakers.
- LED output level meter.
- Speaker cables supplied.
- Optional BMS-10A Mic Stand Adaptor for the mixer unit.
General specifications:
Output Power (Maximum)
Output Power (RMS) |
250W+250W(±10%)/4Ω @10% THD at 1kHz (SPEAKERS L/R)
≤200W+200W/4Ω @1% THD at 1kHz (SPEAKERS L/R) |
| Maximum Output Level |
116dB (1m) |
| Frequency Response (Nominal output level@1kHz) |
-3dB, 0dB, +1dB @20Hz~20kHz (MUSIC/SPEECH=MUSIC) (MONITOR OUT)
-3dB, 0dB, +1dB @80Hz~20kHz (MUSIC/SPEECH=SPEECH) (REC OUT)
-3dB, 0dB, +1dB @20Hz~20kHz, 1W OUTPUT (MUSIC/SPEECH=MUSIC, without Speaker EQ) (SPEAKERS L/R) |
| Total Hamonic Distortion |
≤0.5% @20Hz, 1kHz, 20kHz +14dBu GAIN=nominal (MONITOR OUT, REC OUT) |
Hum & Noise
(Equivalent Input Noise, Rs=150Ω, MIC/LINE = MIC) |
≤-106dBu (CH1/2)
≤-112dBu (CH3/4)
≤-65dBu residual output noise (SPEAKERS L/R) |
| Crosstalk (1kHz) |
≤-70dB between input channels |
| Phantom power switch |
ON / OFF (CH1-4) |
| COMP/LIMIT switch |
ON=COMP, OFF=LIMIT (CH1/2) |
| Input Channel Equalization |
±15 dB
HIGH: 10kHz shelving
LOW: 100Hz shelving |
| Power Consumption |
65W |
| Dimentions (W x D x H) |
342 x 298 x 544.5 mm |
| Weight |
24kg (Speaker x2 + Powered Mixer) |
Speaker(500S)
| Enclosure |
2-way bass-reflex type, Polyprolylene, Black |
| Crossover Frequency |
4.0kHz (LF:12dB/oct, HF:12dB/oct) |
| Frequency Range |
55Hz~20kHz (-10dB) |
| Speaker Unit |
LF: 10"(25cm) Cone
HF: 1"(2.54cm) Compression Driver |
Other Photos:
Downloads:
|
